 |
| Quantity: | |
|---|---|
WK6
KERUI
This wireless water leakage detection alarm adopts advanced wireless transmission technology. When the water level exceeds the set threshold (either two or more adjacent sensors at the bottom of the water leakage detector detect water submergence, or the water drop sensor above is fully covered by water on two sensors), the water submergence detector will immediately trigger an alarm. It will then send a signal to your mobile phone via a wireless WiFi network, notifying you that the water level is excessive or water drops have fallen on the detector, and advising you to take corresponding measures in a timely manner.
Among the bottom sensors, the alarm will be triggered immediately if two parallel detection sensors detect water; it will not trigger if two diagonal sensors detect water.
2. The detector will alarm for 15 seconds when submerged. If the device remains submerged after the initial alarm, it will continue to sound an alarm every 15 seconds (2 seconds per alarm) until it is dehydrated or the alarm is canceled by pressing a button. If submersion persists for more than 24 hours, the water leakage detector will stop issuing alarm prompts.
If the extension cord sensor comes into contact with water, the water immersion detector will immediately sound an alarm.
This wireless water leakage detection alarm adopts advanced wireless transmission technology. When the water level exceeds the set threshold (either two or more adjacent sensors at the bottom of the water leakage detector detect water submergence, or the water drop sensor above is fully covered by water on two sensors), the water submergence detector will immediately trigger an alarm. It will then send a signal to your mobile phone via a wireless WiFi network, notifying you that the water level is excessive or water drops have fallen on the detector, and advising you to take corresponding measures in a timely manner.
Among the bottom sensors, the alarm will be triggered immediately if two parallel detection sensors detect water; it will not trigger if two diagonal sensors detect water.
2. The detector will alarm for 15 seconds when submerged. If the device remains submerged after the initial alarm, it will continue to sound an alarm every 15 seconds (2 seconds per alarm) until it is dehydrated or the alarm is canceled by pressing a button. If submersion persists for more than 24 hours, the water leakage detector will stop issuing alarm prompts.
If the extension cord sensor comes into contact with water, the water immersion detector will immediately sound an alarm.
